Product Offerings

BLUE-MAX®

  • BLUE-MAX® Boiler Gaskets

    Tests by major boiler manufacturers confirm that Blue-Max® gaskets seal- with zero leakage-on steam to 450 psi and on cold-water hydro tests up to 1500 psi and Blue-Max® withstands working temperatures up to 500 degrees Fahrenheit. Rubber gaskets simply can't withstand that kind of pressure and heat.

    Zero Leakage in steam up to 450 psi Zero Leakage in cold water hydro up to 1500 psi

    • Working Temperatures
      up to 500°F

BLACK-MAX®

  • BLACK-MAX® Boiler Gaskets

    Say Goodbye to Spiral-Wound Gaskets. Compared to spiral wound gaskets, Black-Max seals better and has much better recovery properties. It also weighs less than half of that of spiral gaskets, so they’re easier to handle and you’ll save on freight charges. And while spiral gaskets require near-perfect conditions, Black-Max gaskets seal on rough, pitted surfaces under less compressive load.

    • Temperature:
      -400° F (-240° C) to +850° F (+454° C) in atmosphere,
      +1200° F (+650° C) in steam
    • Pressure:
      2000 psig (70 bar)
    • P x T
      175,000 (6,000) 1/4"
    • M Factor
      2 (Smooth Flange Surface)
    • Y Stress
      900 psi (6 MPa) (Smooth Flange Surface)
    • Maximum Gasket Load
      24,000 psi (165 MPa)

Gaskets

  • 150# Standard Flange Gasket Full Face - .062"

    Made with aramid fiber and a NBR binder. These gaskets can be used in a wide range of general service applications. They offer excellent sealability characteristics and can be made in many shapes and sizes in addition to ANSI B16.5 flanges.

    • Temperature Rating:
      Max +750F / +400C Min -40F / -40C
      Con +480F / 250C
    • Pressure Rating:
      Max 1400 psi / 100kg/cm2
      Density: gm/cm3 1.70 - 2.00
    • Tensile Strength:
      ASTM F-152 (n/mm2) 7
      DIN 52910 (n/mm2) 5
    • Compressibility:
      ASTM F36A (%) 7-15
    • Recovery:
      ASTM F36A (%) 50

  • 150# Standard Flange Gasket Full Face - .125"

    Made with aramid fiber and a NBR binder. These gaskets can be used in a wide range of general service applications. They offer excellent sealability characteristics and can be made in many shapes and sizes in addition to ANSI B16.5 flanges.

    • Temperature Rating:
      Max +750F / +400C Min -40F / -40C
      Con +480F / 250C
    • Pressure Rating:
      Max 1400 psi / 100kg/cm2
      Density: gm/cm3 1.70 - 2.00
    • Tensile Strength:
      ASTM F-152 (n/mm2) 7
      DIN 52910 (n/mm2) 5
    • Compressibility:
      ASTM F36A (%) 7-15
    • Recovery:
      ASTM F36A (%) 50

  • 150# Standard Flange Gasket Ring - .062"

    Made with aramid fiber and a NBR binder. These gaskets can be used in a wide range of general service applications. They offer excellent sealability characteristics and can be made in many shapes and sizes in addition to ANSI B16.5 flanges.

    • Temperature Rating:
      Max +750F / +400C Min -40F / -40C
      Con +480F / 250C
    • Pressure Rating:
      Max 1400 psi / 100kg/cm2
      Density: gm/cm3 1.70 - 2.00
    • Tensile Strength:
      ASTM F-152 (n/mm2) 7
      DIN 52910 (n/mm2) 5
    • Compressibility:
      ASTM F36A (%) 7-15
    • Recovery:
      ASTM F36A (%) 50

  • 150# Standard Flange Gasket Ring - .125"

    Made with aramid fiber and a NBR binder. These gaskets can be used in a wide range of general service applications. They offer excellent sealability characteristics and can be made in many shapes and sizes in addition to ANSI B16.5 flanges.

    • Temperature Rating:
      Max +750F / +400C Min -40F / -40C
      Con +480F / 250C
    • Pressure Rating:
      Max 1400 psi / 100kg/cm2
      Density: gm/cm3 1.70 - 2.00
    • Tensile Strength:
      ASTM F-152 (n/mm2) 7
      DIN 52910 (n/mm2) 5
    • Compressibility:
      ASTM F36A (%) 7-15
    • Recovery:
      ASTM F36A (%) 50

  • 300# Standard Flange Gasket Full Face - .062"

    Made with aramid fiber and a NBR binder. These gaskets can be used in a wide range of general service applications. They offer excellent sealability characteristics and can be made in many shapes and sizes in addition to ANSI B16.5 flanges.

    • Temperature Rating:
      Max +750F / +400C Min -40F / -40C
      Con +480F / 250C
    • Pressure Rating:
      Max 1400 psi / 100kg/cm2
      Density: gm/cm3 1.70 - 2.00
    • Tensile Strength:
      ASTM F-152 (n/mm2) 7
      DIN 52910 (n/mm2) 5
    • Compressibility:
      ASTM F36A (%) 7-15
    • Recovery:
      ASTM F36A (%) 50

  • 300# Standard Flange Gasket Full Face - .125"

    Made with aramid fiber and a NBR binder. These gaskets can be used in a wide range of general service applications. They offer excellent sealability characteristics and can be made in many shapes and sizes in addition to ANSI B16.5 flanges.

    • Temperature Rating:
      Max +750F / +400C Min -40F / -40C
      Con +480F / 250C
    • Pressure Rating:
      Max 1400 psi / 100kg/cm2
      Density: gm/cm3 1.70 - 2.00
    • Tensile Strength:
      ASTM F-152 (n/mm2) 7
      DIN 52910 (n/mm2) 5
    • Compressibility:
      ASTM F36A (%) 7-15
    • Recovery:
      ASTM F36A (%) 50

  • 300# Standard Flange Gasket Ring - .062"

    Made with aramid fiber and a NBR binder. These gaskets can be used in a wide range of general service applications. They offer excellent sealability characteristics and can be made in many shapes and sizes in addition to ANSI B16.5 flanges.

    • Temperature Rating:
      Max +750F / +400C Min -40F / -40C
      Con +480F / 250C
    • Pressure Rating:
      Max 1400 psi / 100kg/cm2
      Density: gm/cm3 1.70 - 2.00
    • Tensile Strength:
      ASTM F-152 (n/mm2) 7
      DIN 52910 (n/mm2) 5
    • Compressibility:
      ASTM F36A (%) 7-15
    • Recovery:
      ASTM F36A (%) 50

  • 300# Standard Flange Gasket Ring - .125"

    Made with aramid fiber and a NBR binder. These gaskets can be used in a wide range of general service applications. They offer excellent sealability characteristics and can be made in many shapes and sizes in addition to ANSI B16.5 flanges.

    • Temperature Rating:
      Max +750F / +400C Min -40F / -40C
      Con +480F / 250C
    • Pressure Rating:
      Max 1400 psi / 100kg/cm2
      Density: gm/cm3 1.70 - 2.00
    • Tensile Strength:
      ASTM F-152 (n/mm2) 7
      DIN 52910 (n/mm2) 5
    • Compressibility:
      ASTM F36A (%) 7-15
    • Recovery:
      ASTM F36A (%) 50

  • McDonnell Miller Gaskets NBR

    Made with aramid fiber and a NBR binder. These gaskets can be used in a wide range of general service applications. They offer excellent sealability characteristics and can be made in many shapes and sizes in addition to ANSI B16.5 flanges.

    • Temperature Rating:
      Max +750F / +400C Min -40F / -40C

  • McDonnell Miller Gaskets Teflon

    Made from mechanical grade PTFE resin these gaskets can handle a wide range of aggressive chemicals.

    • Temperature Rating:
      Max +500F / +260C Min -450F / -270C

  • Spiral Wound Gaskets 150#

    Spiral Wound gaskets utilizes an external ring where the ID is grooved to insert a sealing element. The external ring or centering ring is designed to properly guide the gasket on a bolted flange accurately centering gasket. The Centering also provides additional radial strength to prevent gasket blowout and acts as a compression limiter.

    304ss Winding Flexible Graphite Filler Carbon Steel Outer Guide Ring

    • Working Temperature:
      -320F / -195C +950F / +510C
      ASME B 16.20 standard

  • Spiral Wound Gaskets 300#

    Spiral Wound gaskets utilizes an external ring where the ID is grooved to insert a sealing element. The external ring or centering ring is designed to properly guide the gasket on a bolted flange accurately centering gasket. The Centering also provides additional radial strength to prevent gasket blowout and acts as a compression limiter.

    304ss Winding Flexible Graphite Filler Carbon Steel Outer Guide Ring

    • Working Temperature:
      -320F / -195C +950F / +510C
      ASME B 16.20 standard

Packings

  • Pure Graphite Packing

    Pure graphite packing is braided from specially treated flexible graphite yarn. This flexible graphite yarn is made from exfoliated high purity crystalline mineral graphite (flake graphite). It maintains all characteristics of mineral graphite: heat resistant, chemical resistant, resilient, lubricant, pliable, conformable, and thermal conductive.

    Braided from high purity flexible graphite with high temperature inorganic carrier.

    • Construction:
      Interlock Braid
    • Working Temperature:
      -328F / -200C +850F / +455C Atmosphere
      +1200F / +650C Steam
    • Rotary Pressure:
      500 psi / 35 bar
    • Valve Pressure:
      3000 psi / 200 bar
    • Shaft Speed:
      4,000 fpm / 20 m/s
    • pH
      0-14 except strong oxidizers

  • Pure Graphite Packing with Carbon Corners

    Pure graphite packing is braided from specially treated flexible graphite yarn. This flexible graphite yarn is made from exfoliated high purity crystalline mineral graphite (flake graphite). It maintains all characteristics of mineral graphite: heat resistant, chemical resistant, resilient, lubricant, pliable, conformable, and thermal conductive.

    Braided from high purity flexible graphite with high temperature inorganic carrier and carbon filiment corners.

    • Construction:
      Interlock Braid
    • Working Temperature:
      -328F / -200C +850F / +455C Atmosphere
      +1200F / +650C Steam
    • Rotary Pressure:
      500 psi / 35 bar
    • Valve Pressure:
      4000 psi / 275 bar
    • Shaft Speed:
      4,000 fpm / 20 m/s
    • pH
      0-14 except strong oxidizers

  • Pure Teflon® Packing

    Braided Mechanical Compression Packing, also commonly known as braided packing, compression packing or mechanical packing, is a soft, pliant and resilient material that is used to inserted into the annular space or stuffing box to seal a rotating or reciprocating device such as pumps and valves.

    Tough, durable and chemical resistant.

    • Construction:
      Interlock Braid
    • Working Temperature:
      -450F / -270C +500F / +260C
    • Rotary Pressure:
      300 psi / 20 bar
    • Valve Pressure:
      2000 psi / 138 bar
    • Shaft Speed:
      1,500 fpm / 8 m/s
    • pH
      0-14 Should not be used in chlorine
      Not FDA approved

  • Teflon® Synthetic Packing

    Braided Mechanical Compression Packing, also commonly known as braided packing, compression packing or mechanical packing, is a soft, pliant and resilient material that is used to inserted into the annular space or stuffing box to seal a rotating or reciprocating device such as pumps and valves.

    An economical substitute for asbestos packing or PTFE packing.

    • Construction:
      Interlock Braid
    • Working Temperature:
      -170F / -110C +500F / +260C
    • Rotary Pressure:
      300 psi / 20 bar
    • Shaft Speed:
      1,500 fpm / 8 m/s
    • pH
      4-10

Joint Sealant

  • Expanded Teflon® Joint Sealant

    Expanded PTFE Joint Sealant is a soft, compressible gasket material made of 100% pure, expanded PTFE. It is a form-in-place gasket that conforms to almost any sealing surface. Upon compression, it forms a thin, hard ribbon that fills in surface irregularities and creates an extremely tight seal. It is capable of withstanding a wider range of pressures, temperatures and chemical environments than any other soft gasket. Convenient adhesive strip and peel-off backing allow easy installation on both horizontal and vertical surfaces.

    • Temperature Range:
      -450 F to 600 F
    • Pressure Range:
      F. V. to 3,000 psi
    • pH Range:
      0-14
    • Pressure x Temperature:
      350,000
    • FDA Compliant:
      PTFE 21 CFR 177.1550
      Adhesive 21 CFR 175.105
    • ASTM Testing:
      F36 Compressibility 64-69%
      F38 Creep Resistance 38-40%

Ceramic Blanket

  • Ceramic Blanket 8 lb Density

    Ceramic Blanket resists temperature as high as 2300°. This material is lightweight and has very low thermal conductivity, excellent handling strength, low heat storage, thermal shock resistance and corrosion resistance (commonly used acid and alkali). It also provides excellent sound absorption and excellent fire protection.

    • Chemical Composition (refractory fiber only):
      Total Al2O3 and SiO2 >97% ( Al2O3: 47%); Fe2O3: < 1.1%
    • Fiber Physical Properties:
      Fiber Diameter 2 - 4 microns; Fiber Length 100 - 250mm;
      Refractory fiber content >85%
      Fiber Shrinkage (1800°F, 3h) < 3.5%;
      Weight Loss(1800°F) 8-10%
    • Working Temperature :
      1,800 °F. for Continuous Use; 2300 °F Maximum

Rope

  • Round Ceramic Braided Rope

    Resists temperature as high as 2300° F. This material is lightweight and has very low thermal conductivity. It provides excellent insulation at high temperature. It also resists corrosive chemicals, commonly used acid and alkali. The fiber is strong and abrasive. It can be used in tough environment.

    • Chemical Composition (refractory fiber only):
      Total Al2O3 and SiO2 >97% ( Al2O3: 47%); Fe2O3: < 1.1%
    • Fiber Physical Properties:
      Fiber Diameter 2 - 4 microns; Fiber Length 100 - 250mm;
      Refractory fiber content >85%
      Fiber Shrinkage (1800°F, 3h) < 3.5%;
      Weight Loss(1800°F) 8-10%
    • Working Temperature :
      1,800 °F. for Continuous Use; 2300 °F Maximum

  • Round Fiberglass Braided Rope

    Fiberglass textile products are made from high temperature E-glass. It has outstanding heat resistance, high tensile strength, low thermal conductivity, and excellent chemical resistance. They are durable, resistant to mildew, and have no hazard to health. Fiberglass textiles are ideal material for various industrial insulation applications. They are a good substitute for asbestos for 1000° F level applications.

    • Working Temperature :
      1,000 °F. for Continuous Use

  • Square Ceramic Braided Rope

    Resists temperature as high as 2300° F. This material is lightweight and has very low thermal conductivity. It provides excellent insulation at high temperature. It also resists corrosive chemicals, commonly used acid and alkali. The fiber is strong and abrasive. It can be used in tough environment.

    • Chemical Composition (refractory fiber only):
      Total Al2O3 and SiO2 >97% ( Al2O3: 47%); Fe2O3: < 1.1%
    • Fiber Physical Properties:
      Fiber Diameter 2 - 4 microns; Fiber Length 100 - 250mm;
      Refractory fiber content >85%
      Fiber Shrinkage (1800°F, 3h) < 3.5%;
      Weight Loss(1800°F) 8-10%
    • Working Temperature :
      1,800 °F. for Continuous Use; 2300 °F Maximum

Tape

  • Woven Ceramic Fiber Tape Fiber Glass Insert

    Resists temperature as high as 2300° F. This material is lightweight and has very low thermal conductivity. It provides excellent insulation at high temperature. It also resists corrosive chemicals, commonly used acid and alkali. The fiber is strong and abrasive. It can be used in tough environment.

    • Chemical Composition (refractory fiber only):
      Total Al2O3 and SiO2 >97% ( Al2O3: 47%); Fe2O3: < 1.1%
    • Fiber Physical Properties:
      Fiber Diameter 2 - 4 microns; Fiber Length 100 - 250mm;
      Refractory fiber content >85%
      Fiber Shrinkage (1800°F, 3h) < 3.5%;
      Weight Loss(1800°F) 8-10%
    • Working Temperature :
      1,800 °F. for Continuous Use; 2300 °F Maximum

  • Woven Ceramic Fiber Tape Inconel Wire Insert

    Resists temperature as high as 2300° F. This material is lightweight and has very low thermal conductivity. It provides excellent insulation at high temperature. It also resists corrosive chemicals, commonly used acid and alkali. The fiber is strong and abrasive. It can be used in tough environment.

    An economical substitute for asbestos packing or PTFE packing. Constuction: Interlock Braid

    • Chemical Composition (refractory fiber only):
      Total Al2O3 and SiO2 >97% ( Al2O3: 47%); Fe2O3: < 1.1%
    • Fiber Physical Properties:
      Fiber Diameter 2 - 4 microns; Fiber Length 100 - 250mm;
      Refractory fiber content >85%
      Fiber Shrinkage (1800°F, 3h) < 3.5%;
      Weight Loss(1800°F) 8-10%
    • Working Temperature :
      1,800 °F. for Continuous Use; 2300 °F Maximum

  • Woven Fiberglass Tape

    Fiberglass textile products are made from high temperature E-glass. It has outstanding heat resistance, high tensile strength, low thermal conductivity, and excellent chemical resistance. They are durable, resistant to mildew, and have no hazard to health. Fiberglass textiles are ideal material for various industrial insulation applications. They are a good substitute for asbestos for 1000° F level applications.

    • Working Temperature :
      1,000 °F. for Continuous Use
Request Product / Custom Size
If you don't see your product or size listed, please complete our product request form and we will do our best to fulfill your order promptly.
Contact Info

OG Supply, Inc.
150 Vander Street
Corona, California 92880

P: (951) 279-7840
F: (951) 279-7779
E: info@ogsupply.com